Factory Provide HDPE Plastic Particle CAS No. 90-402-88

• Feature: Photodegradable
• CAS No.: 9002-88-4
• Formula: (C2h4)N
• Model NO.: hdpe
• EINECS: 618-339-3
• Material: High Density Polyethylene/HDPE
• Usage: General Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Color: White
• Melting Point: 85-110c
• Plastic Forming Methdo: Film Pressure
• Grade: High Quality
• Purity: 99.9
• Transport Package: Carton
• Specification: 25Kgs/Bag
• Origin: China
• HS Code: 3901100090

Product Description

HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion

Properties:High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of
0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good
mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good
 

Product Parameters

Performance of the project		Test condition [condition]	The test method	The test data	The data unit
Basic performance	Density mass index		GB/T 1033	0.948±0.002	g/cm3
	Density test results		GB/T 1033	0.948	g/cm4
	Melt flow rate mass index	190ºC/5.0kg	GB/T 3682	0.23±0.03	g/10min
	Melt flow rate test results		GB/T 3682	0.25	g/10min
	Melt flow rate mass index	190ºC/21.6kg	GB/T 3682	6.2±1.5	g/10min
	Melt flow rate test results		GB/T 3682	6.4	g/10min
Mechanical properties of	Tensile yield strength quality index		GB/T 1040	≥23	MPa
	Test results of tensile yield strength		GB/T 1040	27.6	MPa
	Elongation at break quality index		GB/T 1040	≥600	%
	Test results of elongation at break		GB/T 1040	804	%
	Quality index of impact strength of simply supported beam		GB/T 1043	≥25	KJ/m2
	Test results of impact strength of simply supported beam		GB/T 1043	26.7	KJ/m2
Other properties	Volatile matter quality index		GB/T 15658 1	≤350	mg/kg
	Volatile test results		GB/T 15658 1	Did not check out	mg/kg
Biochemical property	Cleanliness (color granule) quality index		SH/T 1541	≤20	grain/kg
	Cleanliness (color particle) test results		SH/T 1541	0	grain/kg
	Cleanliness (impurities) quality index		SH/T 1541	≤60	grain/kg
	Cleanliness (impurities) test results		SH/T 1541	0	grain/kg